Hose restraint are far more superior to cable sling type whip checks as it restrict hoses from whipping. This will avoid fatality to human and equipment within the vicinity.

Our hose restraints can be made in a range of materials and style combinations, depending on the application and user preference. They are available in highest grade of galvanised steel and 316 stainless steel. Each hose restraint is woven with a minimum of 2 ply x 12 strands for increase grip and durability.

Users can be confident that our restraints are made to the same highest quality at all time. Factory conducts schedule quality and tensile strength tests on our products. Our restraints are tested in batches by an independent NATA accredited assessor on a calibrated test bed. All restraints are tagged with the size and certificate number which corresponds to the most recent destruction test performed for that product. Each hose restraint comes with a copy of the tensile test and examination for that batch.


 

2 Eye Hose Restraint


 

4 Eye Hose Restraint (Customize)

The four-eye hose restraint offer a higher level of safety as the entire length of the high pressure hose is covered. They are custom made for your specific requirements and to your individual specifications. Details required are hose outer diameter and length from shackle point to shackle point.


 

Cable Socks

Single Eye

For light to medium hauling of communication and power cable. To be used in underground conduits, trenches, cable trays and for service lines to factories.

Size available
Diameter: 8 to 240 mm
Overall length: 400 to 3000 mm
Breaking strength (kg): 1500 to 14000

Offset Eye

Used for pulling slack during final placement of cable in exchange buildings and at termination points such as pole tops where the end of the cable cannot be used to haul from.

Size available
Diameter: 8 to 240 mm
Overall length: 500 to 3000 mm
Breaking strength (kg): 1500 to 14000

Lace-up

Generally used for supporting electricity cable in vertical or sloping position and is also ideal for use in manholes where the longitudinal movement of the cable caused by road vibration needs to be checked.
Size available

Diameter: 8 to 240 mm
Overall length: 440 to 3000 mm
Breaking strength (kg): 1500 to 14000

Open ended

These stockings are open both ends to butt rope or cable ends together (e.g. for elevator or rope replacement) and have a double weave galvanized wire construction. The old cable may be attached to the new one and simply pulled through the blocks.

Size available
Diameter: 8 to 240 mm
Overall length: 650 to 4050 mm
Breaking strength (kg): 1100 to 14000